Results 1 to 10 of 31
Thread: Cara nak hack astro..
22-08-2011, 09:02 AM #1
Did you know that one of the reason Measat Broadcasting suddenly change their red smart card to gold smartcard with the pretext of giving more choice and advance features is just a gimmick ! There are ppl out there; that have decoded the smart card and making the card accessible to all astro channels. in other words, they had found the loophole in the decoding protocols of the software.
Basically, our astro decoders recieved all channels from the satelite. its the job of the smartcard (linked to our accounts) that ‘allows’ us to view the channels by decoding/descramble only the channels that we’ve subcribed. pretty simple rite
but hackers do exist my friends !
in order to decode all channels; its pretty simple procedure. all you need is some clean damp soft cloth, tissue, astro remote control.
First of all, take out your gold card (let me use the term gold card… perasan kaya sat!! Instead of astro smartcard ) using the damp cloth, wipe the chip on top of the card. the chip is some gold colored plates similar as on your hp sim card. this is to clean the dust and to make sure it has clear contacts with the reader. then wipe it dry with the clean tissue. make sure your write down 12 digit serial number (the big size numbers behind the card) and 10 decoder acces code (the small size numbers printed next to the serial numbers) as these two set of numbers are crucial in the next steps
insert back the card into SLOT NO 2 ! (normally the card is in the slot no 1)
make sure the decoder is in standby mode (clock is shown)
without pressing power (red) button press-> Program + ; MENU and then OK
then using the remote key pad; key in all the 12 digit serial numbers
after that press ok and then press the power on button
after the initial screen on the tv; it should display blue background with the word programming mode. blinking. you’ve halfway done !
Should the screen does not appears on the tv (make sure your tv is on dude). repeat step 1. and make sure the 12 digit serial numbers is correctly keyed. you only have 3 trials before the programming mode is blocked and you can only attempt it after 24hrs block from astro (default security mode)
then press the green button on the remote
and the screen will ask; enter code
now key in all the 10 digit acces code tu (make sure the code is correct)
then press page up 2x
then a list of all astro channels will be displayed
press option 3 to select all channels
press option 2 to allow access to channels
press option 4 to decode all
press option 1 to confirm view all
press ok to confirm
and then info-menu-0 to save and exit
wait for decoder to boot up
klw dah ade,,tlg delete,,
Last edited by are_yie; 22-08-2011 at 09:04 AM.
22-08-2011 09:02 AM # ADSCircuit advertisement
- Join Date
- Advertising world
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)